Physical Volume Library Drive Not Found Backup Exec 2010
LINK ->>->>->> https://urluso.com/2tvwHa
How to Fix the Error \"Physical Volume Library Drive Not Found\" in Backup Exec 2010
If you are using Backup Exec 2010 to backup your data, you may encounter the error \"Physical Volume Library Drive Not Found\" when you try to run a backup job. This error means that Backup Exec cannot access the tape drive or library that you have configured for your backup destination. There are several possible causes and solutions for this error, depending on your setup and configuration.
Here are some steps you can try to resolve the error:
Check the physical connection of the tape drive or library. Make sure that the power cord, SCSI cable, and terminator are properly connected and secure. If you are using a USB or FireWire connection, make sure that the device is recognized by the operating system and has the latest drivers installed.
Check the device configuration in Backup Exec. Go to Devices > Configure Devices and make sure that the tape drive or library is detected and enabled. If not, try to scan for new devices or use the Device Configuration Wizard to add the device manually.
Check the device drivers in Backup Exec. Go to Tools > Install Tape Device Drivers and make sure that the tape drive or library has the correct driver installed. If not, try to update or reinstall the driver from the Backup Exec installation media or from the device manufacturer's website.
Check the media labels in Backup Exec. Go to Media > All Media and make sure that the tapes or cartridges that you want to use for backup have valid media labels and are not write-protected or expired. If not, try to inventory, label, or erase the media as needed.
Check the backup job settings in Backup Exec. Go to Job Monitor > Job History and make sure that the backup job is configured with the correct device, media set, selection list, and schedule. If not, try to edit or recreate the backup job as needed.
If none of these steps resolve the error, you may need to contact Symantec technical support or your device vendor for further assistance.
The error \"Physical Volume Library Drive Not Found\" in Backup Exec 2010 can be frustrating and time-consuming to troubleshoot. However, by following the steps above, you can narrow down the possible causes and find the best solution for your situation. Backup Exec 2010 is a powerful and reliable backup software that can protect your data from various threats and disasters. By ensuring that your tape drive or library is properly connected, configured, and maintained, you can avoid this error and enjoy a smooth backup process.
Backup Exec 2010 supports a wide range of tape drives and libraries from different vendors and models. You can use the Hardware Compatibility List (HCL) on the Symantec website to check if your device is compatible with Backup Exec 2010 and what driver version is required. You can also use the Tapeinst.exe utility that comes with Backup Exec 2010 to install or uninstall the device drivers. If you have any questions or issues with your device drivers, you can contact Symantec technical support or your device vendor for help.
Backup Exec 2010 also provides various features and options to optimize your backup performance and efficiency. You can use the Backup Exec Device Test (BEDTest) tool to test the functionality and speed of your tape drive or library. You can also use the Device Analysis feature to monitor the health and status of your device and receive alerts for any errors or warnings. You can also use the Device Pool feature to group multiple devices together and balance the backup workload among them. By using these features and options, you can improve your backup quality and reliability. aa16f39245