How to Fix G-Tide V7s Hang Logo Problem with Pac Firmware
If you have a G-Tide V7s smartphone that is stuck on the boot logo or has a display problem, you may need to flash it with a new firmware. Flashing is the process of installing a new software on your device, which can solve various issues and improve its performance. However, flashing can also be risky if you don't follow the correct steps or use the wrong files.
In this article, we will show you how to flash your G-Tide V7s with a pac firmware file that can fix the hang logo and display problems. A pac file is a package file that contains all the necessary files for flashing a Spreadtrum (SPD) device. The G-Tide V7s has a Spreadtrum SP7731 chipset and runs on Android 6.0 Marshmallow. You will need a computer, a USB cable, and some tools to flash your device.
What You Need
A G-Tide V7s smartphone with at least 50% battery charge.
A computer running Windows XP or higher.
A USB cable compatible with your device.
A pac firmware file for your device. You can download it from here[^1^] or here[^2^]. Make sure you download the correct file for your device model and region.
A flash tool that can flash pac files. You can use SPD Upgrade Tool or SPD Research Tool. You can download them from here.
A driver that can recognize your device on your computer. You can use SPD Driver or SCI Android USB Driver. You can download them from here.
What You Do
Install the driver on your computer. Follow the instructions on the screen to complete the installation.
Extract the pac firmware file and the flash tool on your computer. You will need a software like WinRAR or 7-Zip to do this.
Open the flash tool folder and run the executable file as administrator.
Click on Load Packet or Load File and browse to the pac firmware file that you extracted.
Click on Start Downloading or Start Button to begin the flashing process.
Turn off your device and remove the battery if possible.
Connect your device to your computer via USB cable while holding the Volume Down or Volume Up button. This will put your device in download mode.
The flash tool will detect your device and start flashing it. Wait until you see a green Passed or OK message on the screen.
Disconnect your device and reinsert the battery if you removed it.
Turn on your device and wait for it to boot up. It may take some time for the first boot, so be patient.
What You Get
Congratulations! You have successfully flashed your G-Tide V7s with a pac firmware file that can fix the hang logo and display problems. You should now be able to use your device normally without any issues. If you encounter any problems during or after the flashing process, you can try to repeat the steps or contact us for further assistance.
G-Tide V7s Flash File Sp7731 6.0 Hang Logo Fix Pac Firmware
Download Zip: https://bestpodabpo.blogspot.com/?l=2tG40z
29c81ba772
https://www.voicingwithqueen.com/group/foodies-group/discussion/73c70a34-f6bb-4bd9-a4bc-19e7868781e0